Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterDuraFlex Chimney Repair in Olympia: What to Know First
We provide independent DuraFlex chimney repair in Olympia, Lacey, and Tumwater, with most repairs quoted and scheduled within 48 hours. A written price, written scope, and written warranty are delivered before any work starts - Clause 1 of the Haven Standard. Typical DuraFlex repairs run $340 to $1,800 depending on whether we’re repointing mortar, replacing spalled brick, or rebuilding a crown. This page is for Olympia homeowners who’ve confirmed they’ve got a DuraFlex liner, cap, or component and need someone who knows how these products age in our wet South Sound climate. Call (360) 464-2015 to speak with a live person and book a camera inspection.
How DuraFlex Products Fail - and How We Fix Them
- DuraFlex 316Ti and 304 stainless liners in older Olympia homes near Budd Inlet show crevice corrosion at the flex-to-rigid transition where salt air meets condensation. We cut back to sound metal, weld a new collar, and sleeve with a DuraFlex OEM transition piece or a compatible 316Ti section from our Haven network - photo-documented before and after, per Clause 4.
- DuraFlex Pro liners, common in 2015-2020 installs around the Westside and South Capitol neighborhoods, develop mortar joint failure where the Pro’s tighter corrugation profile traps moisture against the chimney wall. We don’t just patch; we pull a camera to confirm the full extent, then repoint with Type N mortar formulated for the Pro’s flex cycle, or recommend a full HeatShield SmokeShield application if the bond is too far gone.
- DuraFlex DW (double-wall) caps on homes near Capitol Lake collect debris in the annular gap that the single-wall design doesn’t have. The cap collar fatigues from thermal cycling plus our freeze-thaw winters. We source replacement collars through Olympia Chimney Supply or fabricate from Gelco galvanized when DuraFlex backorder stretches past two weeks - your written quote names which part before we start.
- DuraFlex relined chimneys with original terra cotta still in place - we see this in 1970s ramblers off Harrison and near the Capitol Campus - suffer spalling brick when the DuraFlex liner was sized too tight to the flue, trapping moisture against the clay. The fix is partial terra cotta removal, proper DuraFlex 316Ti resizing, and brick replacement with matching Olympic Peninsula clay brick, not a generic red.
- DuraFlex smooth-wall liners in newer builds around Meridian and Hawks Prairie delaminate at the termination when installers used standard DuraFlex flex caps instead of the smooth-wall-specific adapter. We replace with the correct DuraFlex smooth-wall termination or a Famco equivalent, pressure-test the joint, and document the adapter part number on your record.
Our DuraFlex Chimney Repair Process
- 1
Call and schedule. A live person answers. We book a Level 2 camera inspection - NFPA 211 standard, not a flashlight look. You’ll get a text when your tech is en route, with name and photo.
- 2
Camera goes in first. Corrine Halstead’s rule: the camera goes in first. Everything else follows from what it finds. We document the DuraFlex model, condition, and any interaction with original masonry or other brands.
- 3
Written price before work starts. We deliver scope, price, and warranty in writing - Haven Standard Clause 1. No surprises. If you have a competitor’s written estimate, we’ll give you a free second opinion.
- 4
Parts decision with you. OEM DuraFlex when available and warranted. Quality aftermarket from HeatShield, Gelco, or our Haven network when backordered or when the OEM part has a known revision issue. You see the part number on the quote.
- 5
Repair and test. We complete the repair, pressure-test or smoke-test as appropriate, and run the camera again to verify.
- 6
Documented record delivered. Photos, readings, scope, and warranty - Clause 4 of the Haven Standard. Your record is archived and accessible for future service.
Before
AfterWhat DuraFlex Chimney Repair Costs in Olympia
| Repair Type | Typical Range | What Moves the Price |
|---|---|---|
| Mortar repointing (local) | $340 - $680 | Height, scaffold need, mortar type match |
| Spalled brick replacement (5-15 bricks) | $520 - $1,100 | Brick match availability, ladder vs. scaffold |
| DuraFlex liner transition repair | $580 - $940 | OEM vs. aftermarket collar, weld extent |
| Chimney crown rebuild with DuraFlex termination | $890 - $1,400 | Crown size, pour vs. precast, cap type |
| Partial chimney rebuild with DuraFlex reline | $1,200 - $1,800+ | Brick count, flue size, access difficulty |
These are Olympia-specific ranges based on our 2024-2025 jobs in the South Sound market. Every repair gets a written quote - no “call for pricing.” Call (360) 464-2015 for your exact number; estimates are free.
Why Olympia Homeowners Call Level Two Chimney Olympia for DuraFlex Work
We’ve inspected and cleaned more than 38,000 chimneys since 2009, and a growing share of our Olympia work involves DuraFlex products installed during the 2015-2020 relining boom. Our techs know the difference between a Pro and a DW cap without checking the stamp. The 365-Day Done Right Promise means if the repair fails, we make it right - no argument, no requote. Background-checked, uniformed crews; license number on every page; live phone support 24/7. When DuraFlex parts run long, we don’t leave you hanging - our Haven buying network includes HeatShield, Gelco, and Olympia Chimney Supply for verified-compatible alternatives, always named on your written quote.
FAQs
No, if the repair uses OEM parts and follows DuraFlex installation guidelines. As an independent DuraFlex service provider, we use OEM components when available and document part numbers on your record. Using non-OEM parts may limit warranty coverage for the specific component replaced, which we flag on your written quote before you approve the work. Call (360) 464-2015 to discuss your specific liner model and warranty status.
Most repairs are completed in one day. Mortar repointing and cap replacement typically run 3-5 hours; partial rebuilds with DuraFlex reline work may extend to a second day if curing time is required. We give you a time estimate in writing with your quote, not a four-hour window the morning of. Schedule at (360) 464-2015.
Replace when the liner shows multiple corrosion points, the original chimney structure is compromised, or repair costs exceed 60% of replacement. We repair when the failure is isolated - a single transition, localized spalling, or cap fatigue - and the surrounding system tests sound. The camera inspection shows you which category you’re in before you spend anything. Call for a free estimate.
OEM DuraFlex parts typically arrive in 5-10 business days through our Haven network. For urgent repairs, we stock compatible HeatShield and Gelco alternatives that meet the same 316Ti or galvanized specifications - your quote names the exact part and source before we order. Call (360) 464-2015 to check current availability for your model.
Small mortar gaps become water entry points, which in Olympia’s 50+ inches of annual rainfall accelerates freeze-thaw damage to the chimney structure. A compromised DuraFlex liner or cap can allow carbon monoxide leakage or creosote accumulation near combustibles. We don’t use scare tactics - we show you the camera footage and let you decide the timeline, with an honest assessment of what can wait and what shouldn’t. Call (360) 464-2015 for a free inspection and written recommendation.
Written by Corrine Halstead, Owner, Level Two Chimney Olympia at Level Two Chimney Olympia, serving Olympia and nearby areas.